TOC-IRL
 
HomePortalCalendarFAQSearchMemberlistLog inRegister

Share | 
 

 5e Bottom End Torque Settings Needed

View previous topic View next topic Go down 
AuthorMessage
apexi89

avatar

Male Posts : 294
Join date : 2010-11-03
Age : 27
Location : Kilkenny

PostSubject: 5e Bottom End Torque Settings Needed   Fri Nov 04, 2016 5:10 pm

Couldn't find much with a search so
Does anyone have torque settings for the main bearings and big ends on a standard 5efte?
The sequence of tightening would be handy too.

Back to top Go down
View user profile
cannon91
Kildare Rep
avatar

Male Posts : 2824
Join date : 2012-04-21
Age : 26
Location : Kildare

PostSubject: Re: 5e Bottom End Torque Settings Needed   Fri Nov 04, 2016 5:54 pm

Should have a PDF on the laptop at home
Back to top Go down
View user profile
StarletJames
Offaly Rep
avatar

Male Posts : 1097
Join date : 2014-08-27
Age : 21
Location : Offaly

PostSubject: Re: 5e Bottom End Torque Settings Needed   Fri Nov 04, 2016 6:55 pm

Tightening torques
Cylinder head instructions
Cylinder head
Renew bolts No
Tighten 25 Nm
Tighten 45 Nm
Tighten 90°
Other engine tightening torques
Main bearings Renew bolts/nuts No
Main bearings Stage 1 29 Nm
Main bearings Stage 2 58 Nm
Big end bearings Renew bolts/nuts No
Big end bearings Stage 1 20 Nm
Big end bearings Stage 2 40 Nm
Oil pump to cylinder block 8 Nm
Sump bolts 13 Nm
Sump drain bolt 25 Nm
Flywheel/driveplate 90 Nm/90 Nm
Clutch pressure plate 19 Nm
Crankshaft pulley/damper centre bolt 155 Nm
Camshaft sprocket/gear 51 Nm
Camshaft carrier/cap 13 Nm
Camshaft/rocker cover 7 Nm
Inlet manifold to cylinder head 19 Nm
Exhaust manifold to cylinder head 48 Nm
Spark plugs 18 Nm
Back to top Go down
View user profile
apexi89

avatar

Male Posts : 294
Join date : 2010-11-03
Age : 27
Location : Kilkenny

PostSubject: Re: 5e Bottom End Torque Settings Needed   Fri Nov 04, 2016 9:16 pm

Thanks lad. That's Just what I was looking for.
Just Out of curiosity do you know if they are the same for the 4efte?

@Cannon91. Are the settings you have on the PDF the same as what's above?
Back to top Go down
View user profile
cannon91
Kildare Rep
avatar

Male Posts : 2824
Join date : 2012-04-21
Age : 26
Location : Kildare

PostSubject: Re: 5e Bottom End Torque Settings Needed   Tue Nov 08, 2016 2:52 pm

As far as i know all torque settings are the same.

I've attached a link below:
5efe engine manual
Back to top Go down
View user profile
apexi89

avatar

Male Posts : 294
Join date : 2010-11-03
Age : 27
Location : Kilkenny

PostSubject: Re: 5e Bottom End Torque Settings Needed   Sat Nov 19, 2016 11:58 pm

Brilliant thanks for that. Will be very handy
Back to top Go down
View user profile
Sponsored content




PostSubject: Re: 5e Bottom End Torque Settings Needed   

Back to top Go down
 
5e Bottom End Torque Settings Needed
View previous topic View next topic Back to top 
Page 1 of 1
 Similar topics
-
» Head Torque Settings & Plug Gap
» Nuts and Bolts (Torque Settings)
» torque settings help
» torque settings
» Wheel Torque

Permissions in this forum:You cannot reply to topics in this forum
Toyotaownersclub-irl :: Model Specific Chat :: Cynos Section-
Jump to: